In all honesty I'd recommend ditching the puny factory suck bag brakes and do a c5 conversion. However, I know you don't want to lose your wheels.
So, what it really boils down to is intended usage. If you're just looking to cruise around and putt to car shows or back and forth to work then by all means whatever is cheap will work fine.
However, if you drive the car HARD, then pony up the dough. I personally can't tolerate the stock brakes on a third gen. My last 87 warped the shit out of the rotors and spanked a set of pads in under 6 months. I tossed it all in favor of a c5 front brake conversion and never looked back. Those I got crossdrilled rotors from gm performance and a I forget what brand set of ceramic pads. They held up just fine for over a year and a half of the same if not worse abuse with plenty of life left.
Course I'm not your normal putt around kind of driver either. My third gen has subframe connectors, is a hard top car, ran a stock carb'd 305/700r4, and I still managed to stress crack the sail panels. I am in no way shape or form nice to my cars and can't tolerate the weak suck factory brakes on most f bodies.
But again, for normal people, who don't treat the streets like they're running laps at Watkins glen, napa stuff will probably do. But the first time you feel REAL braking power you'll realize there is a BIG difference.
__________________
The fleet...
|