View Single Post
  #25  
Old 02-07-2011, 03:47 AM
Batman's Avatar
Batman Batman is offline
F-Body Super-hero
 
Join Date: Oct 2009
Location: Whaley Lake, NY
Posts: 1,487
Post Thanks / Like
Thanks (Given):
Thanks (Received):
Likes (Given):
Likes (Received):
Dislikes (Given):
Dislikes (Received):
Default

Quote:
Originally Posted by Bayer-Z28 View Post
^ What heads was he running? What cam/lobes? Engine? All of this comes into play.
-And if flow numbers don't mean shit, then how do YOU buy a set of heads?? By looks?
-Like Mamo said, the head is what depicts what intake you should be running. And seeing as I was spec'd a set of AFR 205's, a good intake will be needed in the future.

I've always said that the 102 is too big, It's just that the deeper I look, the more conflicting evidence I find. I think a 92 and adding cats to my setup will help me keep my bottom end. I don't want to lose any because that's what this cam is for.

And I take flow #'s seriously. It's evidence that something is "different." I bought some cheap parts back then and didn't research them and I am royally kicking myself for it now. Hard to explain, but I DO research things to death before I buy them.

With these "quick" lobes (XE-R, IIRC) that I'm running, if the head can get to a higher flow earlier in the lift (Degrees of rotation = time also), the cam doesn't have to reach max lift (LOST time in rotation) in order to achieve a solid amount of airflow. = more cyl filling, more air earlier and quicker. The intake can obviously add a bit of a bottle neck to this. I don't want to say "restriction" because that's not the word. I also understand that if the runners are too big, it will lose port velocity. And yes, an engine can only injest soo much air. FOr the cam you have you will never make the HP numbers of bigger cams, it is not a possibility. But staright HP numbers are about as worthless as CFM numbers. Build the car to run the way you like it and forget about the numbers. Talk to Pros like Don to help you get the exact set-up you are looking for and don't be blinded by numbers that in the scheme of things don't determine how a car runs

I am looking to extract EVERYTHING this cam has to offer. I am damned to PROVE that it will perform AS GOOD if not BETTER than the other huge cams and that mine has much better driveability. I ran a 12.14 for my second time ever at the track, so this has something.

Yes, I'm stubborn. I'll get either the 92 or the 102. Not sure yet. I researched my cam for two years before I bought it and I'm only on about 6 months to a year researching the intake. It's fascinating to me. I want to know why it is as good as it is.(or is not) I started looking into things and as soon as I opened a can of worms, I just kept wanting to know more. This is a hobby of mine, I guess. Research.
Flow numbers are only part of the story, Knowing how much CFM your engine can actually push and matching the heads to the cam, intake, fuel etc. You can bolt a set of 300+CFM heads to your 346 and if you can only push 215CFM then you are wasting your time and most likely causing the engine to run poorly. Also where are these huge CFM numbers? if it is over .600" lift you probably aren't going to like what you get. You need to find the correct CFM for your set-up and your best bet with that is to talk to someone like Don or buy a complete package. You also need to consider combustion chamber size, shape, etc. Buying heads just by CFM doesn't make much sense.
__________________
-Nick
9/11/01 NEVER forget!
Reply With Quote