View Single Post
  #30  
Old 02-08-2011, 12:02 AM
Bayer-Z28's Avatar
Bayer-Z28 Bayer-Z28 is offline
Resident Gearhead
 
Join Date: Mar 2010
Location: E Falmouth Ma
Posts: 435
Post Thanks / Like
Thanks (Given):
Thanks (Received):
Likes (Given):
Likes (Received):
Dislikes (Given):
Dislikes (Received):
Default

^ I've ALWAYS wanted the TFS heads just because of the mid-lift numbers. They don't need a HUGE cam for them to flow crazy. I've always had my eye on the Torquer V2 or 3. I like those cams and the sound, but TSP seems to only be into higher RPM power and TR seems to do their research in power under the curve.

I think the 215's would still work, but the 205's may have a better velocity. And I'm looking into clarification on "these heads will always outflow the plastic intake" claims. A 102 unported may just be a match. Ported it flows over 280cfm at around .500". My heads peak out at around .280".

And from what I've gathered, the 102 design isn't an increased overall intake VOLUME, it's just a better runner design. And the gurus are saying that the throat has little effect on this, actually. Claims are that they almost needed a radius on the TB during testing of the 92 and the 102 did not need one. The air was slightly obstructed entering the 92mm TB right at the edges of the TB, while on the 102 it was not. Now, I'm wondering if that is from a decrease in air speed entering the TB. Same volume with a larger "hole" would mean slower.... Right? 0_o


And I've got LSK lobes on my cam. Asked the guy who designed it. I can't find my cam card.. :-\
__________________
h/c/i/s/e
Reply With Quote