View Single Post
  #39  
Old 02-09-2011, 03:14 AM
Bayer-Z28's Avatar
Bayer-Z28 Bayer-Z28 is offline
Resident Gearhead
 
Join Date: Mar 2010
Location: E Falmouth Ma
Posts: 435
Post Thanks / Like
Thanks (Given):
Thanks (Received):
Likes (Given):
Likes (Received):
Dislikes (Given):
Dislikes (Received):
Default

^ The LS6 outperforms the LS2. LS2 is a turd compared to the 6 and 3. The TB size doesn't make the intake and has little to do with it. I've learned a LOT this week..
As I see it, the 102 is almost an ITB intake wrapped in polymer/plastic.


Check it.. This settles it.

Quote:
Originally Posted by Tony Mamo @ AFR View Post
OK...this thread is pretty funny talking about nothing....LOL

Guys...

When we are discussing fuel injected applications.....the size of the plenum and the opening or the TB (size) will have zero effect on "low end" power.

This is old school thinking stemming from the very real and often practiced applications where too large a carb might have been bolted on a particular engine combination.

The problem stemming from the fact the large carb slowed the airspeed down enough in the venturi's of the main body to negatively effect the carb atomization and therefore hurt power, torque, fuel economy, and responsiveness until enough RPM was generated to allow the carb to become more effective again (guys older than 45 will be nodding their heads up and down right now while reading this!).

We aren't atomizing fuel here folks....thats handled by the injectors and the real meat and potatoes of manifold design (runner length, shape, and taper) hasn't changed much from the 90, 92 or 102.....its very similar but the 102 does have a superior shaped runner (although the length is very similar), is slightly taller, and ultimately flows more, especially when properly ported.

Yes....a FAST 102 can flow more than a 280 CFM head but thats always the case with a really good intake....ideally you want ALOT of headroom when selecting a manifold so when you bolt it in front of your heads it flows more net to the cylinder with the ultimate situation to not hurt the port any more than placing a radius plate in front of it. Thats pure theory unless we are discussing extremely optimized straight shot tunnel ram style manifolds.

I can port a Gen I single plane intake and make it flow 400 CFM.....when you place it in front of a 300 CFM intake port that port still loses 20 CFM which is very good all thing considered. Take the same intake unported by me that still flows way more out of the box than the 300 CFM intake port in question (say the intake flows 360 CFM out of the box) and now you may only see 265 CFM when placed in front of the head because it hurt the net flow more.

INTERNET MYTH #1 .....My 102 Fast is too big for my 346

Wrong....its a better designed intake thats going to allow more air to pass thru the intake ports and be mixed with more precisely atomized fuel from your injectors.

INTERNET MYTH #2....Its already big....you dont need to port it (or it might hurt the bottom end).

Also wrong....at least when ported properly. Once again it simply makes a good piece even better but I would be the first to admit that on a marginal set of head the gains from the work would be less as well. The better the heads, the more aggressive the RPM, displacement, etc. the more that ported 102 is going to pay you in spades.

The larger the restriction the intake manifold becomes....the better your results will be when you swap to the better intake.

If your still questioning anything lets get it handled now and please refer other people back to the answers when we see the same questions and bad information in other threads....I wish I had a nickel for the guys convinced their inaccurate theories are accurate....LOL

The ONLY potential negative to the 102 design...well besides the cost of admission with the rails etc.....is the TB (airblade) is so large it can create drivability challanges with the tune but its a much easier deal on a cable operated 102 with an IAC motor. ALso, it tends to be extremely responsive which I personally like, however some have complained its too responsive (on/off) and they have to get used to driving it. No big deal in my book....

Hope this helps!

-Tony
__________________
h/c/i/s/e
Reply With Quote