View Single Post
  #52  
Old 02-09-2011, 09:08 PM
84ta406 84ta406 is offline
Future club Dangle member
 
Join Date: Oct 2009
Location: Worcester, MA
Posts: 1,802
Post Thanks / Like
Thanks (Given):
Thanks (Received):
Likes (Given):
Likes (Received):
Dislikes (Given):
Dislikes (Received):
Default

Quote:
Originally Posted by ILuvPizzaTimes10 View Post
i dont agree with that completely. larger intake runners on an engine say at at low rpm and low vacuum. the air can stall in the ports. too big a plenum on a small displacement engine spinning at low rpm/high load will stall air inside the plenum. i mean believe what you wwant. real world is real world not some engine dyno/chassis dyno and the car made 40 more rwhp but ran 3 tenths slower...... i mean get it if you wish. if you choose to believe a guy who ultimatly is a sales man for FAST. of course he's going to tell you its great. and you wont lose anything. there are back to back tests on this i believe hot rod did it and the 102 lost everywere but peak over the 92/92 setup SAME 92mm tb. if i read it right.
Quote:
Originally Posted by Batman View Post
I don't agree with that, the larger runners are what will kill you on stock cubes. You lose all your velocity. The 102 MM T/B isn't necessarily the problem, you can't push the kind of volume to make the 102 effective. Long runners = high RPM power. I Don't see you gaining much if anything but top end over an LS6 intake. The LS6 may bottle neck in the really high RPM but with something like TFS heads and a small/medium size cam for a car you want to be good ont he street and make lots of low and mid range power you aren't gonna be hurt that badly if not better off. I would def go LS6 before a 102 on the engine you are talking about. The 102 has proven in more then one app to be a lesser intake then it's smaller kin (just ask Don).
Quote:
Originally Posted by ILuvPizzaTimes10 View Post
tb size has little to do with how an intake performs on top of an intake port. AIR SPEED! its all about making sure the air moving threw the intake IE plenum and Runner size are sized properly for your setup. STuff a HUGE Tunnel ram on a stock chevy 350 and tell me if it makes any low end. that esentially what you will be doing with a FAST 102 on a midly modded LS1. TB size has nothing to do with it at that point does it?
Quote:
Originally Posted by Batman View Post
forget the T/B , the issue is having more air in the intake than a 346 CI engine can use. Doesn't matter how big the cam is there is only so much volume in the cylinders. The Long runners are the killer on the 102. if you can't flow that air into the cylinder the velocity slows down and it creates turbulence. If you had that cam on a 402 I would still say the 90 or 92 is better for the street but the 102 would at least be functional. I just don't see a 346 being able to pull in enough air to make that intake efficient. You will probably only make good numbers on the top end, which, if I am correct, isn't what you want. Yes the LS6 will be too small of an intake but between the 2 I think you would be happier with the LS6 for what you are asking the car to do. IMO I'd surf the boards and ebay and try to find a FAST 90, that, IMO is the correct intake for what you are doing
We have some winners BOB! Same reasons I didnt go with a Super Victor...
__________________
5.3L LSx, Fbody .500 cam, TH400, 4500 Stall, Moser 9"
Reply With Quote