Up for sale are my modified headers I was going to use for my turbo setup.
These things are brand new and have never been run. I started with a set of Dougs 98-99 fbody shorty headers. I removed all the emissions bs, welded up the holes, smoothed everything out and had 2.5" stainless v-bands professionally tig welded on. Included is the other half of the v-band assemblies so you can customize your own turbo cross-over. This is a FAR more attractive setup in comparison to the typical truck manifolds. Also, the tig was finished all the way around the outside of the exhaust flange (
from the factory Dougs only welds the top and bottoms)
1-5/8 primaries with 2.5" collectors!
350.00
