took a look at the pinion/support had 0 preload, pinion would move side to side probably .005 of an inch, took the pinion nut off and removed the pinion, both bearings wiped out, inner one was the worst, cage and bearings fell right off when i tipped the pinion upside down. support is just a standard one, nothing special. so either the preload was way to tight to begin with and smoked the bearings causing it to loosen up or the preload was to loose from setup or crush sleeve giving out.
looks like ill be starting from scratch, everything is junk except the trutrac and pinion yoke.
also added two new pics in my original post.
__________________

1999 Z28 T-Top M6 - LS6, Bolt Ons, Suspension, MWC Narrowed 9" - 415rwhp 385rwtq 10.847 @ 125.17
1989 IROC-Z H/T M5
2006 F350 SCSB 4x4 6.0L Diesel - Studs, EGR Delete, Powermax Turbo, Extreme Tuning & Exhaust - 13.23 @ 101
|