View Single Post
  #11  
Old 09-21-2013, 04:22 AM
SLP IROC-Z SLP IROC-Z is offline
Post Whore
 
Join Date: Oct 2009
Location: Salem, NH
Posts: 2,051
Post Thanks / Like
Thanks (Given):
Thanks (Received):
Likes (Given):
Likes (Received):
Dislikes (Given):
Dislikes (Received):
Default

Quote:
Originally Posted by ZFreie View Post
wtf, I wonder what an a4 would top out at with them gears lol

And thats crazy your first is that long, even with my 2.73s I would only get 45 our of it at 6k lol just noticed you 7k rev, explains more lol
if i had an automatic the 4.30s would be perfect or maybe a hair to much.

with 4% converter slip 4.57s and a 26.5" tire would go 116mph @ 7k.

4%, 4.30 & 26.5 = 123mph @ 7k.

i wouldnt be pushing it to that kind of RPM if it werent for the MN6 T56 close ratio gearing. first gear is 2.66:1 which is long, the car needs to be over geared in order to move out of the hole. its a compromise. over rev a few hundred rpm on the big end but have the right amount of torque in first, second & third gear.

it does 98mph in 3rd right now, im in high gear for less than half track when i should be in before the 1/8th

I will have roughly 4600ft lbs of torque at the rear axles with 4.57s in first gear as opposed to roughly 4300ft lbs with the 4.30s. More acceleration in 1st gear. Also less speed so less wheel spin. I bet i dont need as many rpm on the launch either.
__________________

1999 Z28 T-Top M6 - LS6, Bolt Ons, Suspension, MWC Narrowed 9" - 415rwhp 385rwtq 10.847 @ 125.17

1989 IROC-Z H/T M5
2006 F350 SCSB 4x4 6.0L Diesel - Studs, EGR Delete, Powermax Turbo, Extreme Tuning & Exhaust - 13.23 @ 101
Reply With Quote