[DAWG]

yeah still having idle issues tried another carb and it only will pull 4" of vacum?
the ultra HP was pullin up to 10"?idle mixture adjustment does nothing on second carb really. I do notice that my vacuum pump is constantly on all the time though and it should turn off after engine start up and it senses engine vacuum? maybe got a vacuum leak im thinkin?
this is my Cam specs:

Part Type: Camshaft
Application: Chevrolet Small Block V8 305-350, '87-'98 (Carbureted)
Cam Style: Hydraulic Roller for OE Roller Applications
Basic RPM Range: 2600-6400 2800-6600
Manufacturers Description: Rough idle, needs good heads. Good upper mid-range. Needs 3500+ stall.
Intake Duration @ .050": 247
Exhaust Duration @ .050": 253
Advertised Intake Duration (@ .006"): 300
Advertised Exhaust Duration (@ .006"): 306
Intake Valve Lift with 1.60 Rocker Ratio: .603"
Exhaust Valve Lift with 1.60 Rocker Ratio: .619"
Lobe Separation Angle: 110 Degrees
Intake Centerline: 106 Degrees
Small Base Circle: No
Cam Gear Attachment: 3-Bolt (step-nose)
Valve Adjustment: Zero Lash Plus ½ Turn
Manufacturer: Howards Cams & Racing Components
Manufacturer's Part Number: 180345-10
Weight: 10.0 lbs.

Note: Oil with ZDDP or ZDDP Additive Required
Note: Stock (O.E) valve springs cannot be used.