lt1 alum heads,weld pro stars,4l60e,10blt & brakes,headers,hyd roller cam,camaro crap

[Suicidal racing]

1. Aluminum lt1 heads of 94 z28 150$ unsure how many miles are on the heads..i can tell you the car had 152k on it.They are stock from my knowledge,comes with valve covers and stock rockers.came off running motor

2. Doug herbert hyd roller cam..has less then 5k for miles on it..came out of just a street car heres the specs 125$.is for leter model block with retianing plate
hyd roller
adv 270 int 284 exh
@50 242 int 244 exh
lift .567/.585 with 1.5 rr
lobe 110
center line 104

3. 4l60e trans out my 94 z28 with stock stall true millage unknown chassis had 152k on it total though 250$

4. 10 bolt rear with disk brakes out my 94 z28 with 2.73 gears same as above 150$


5. Brand new pace setter headers 1 3/4 with 3" collectors..never even bolted on or mocked up on car..reg painted version 200$

6. Weld pro star rims 15x8" 4.75 chevy bolt pattern with 5.25 back spacing..will fit 4th/3rd gen an g body..comes with 1 center cap 200$

7. Camaro parts off my 94 z28
doors 100$
hood 75$
rear hatch with glass 75$
bumper covers 75$


Thanks
Tony
413-519-6268

[Suicidal racing]

let me ad ill trade some parts for some weld pro star 15x10 4.5 bolt pattern with 6.5 back spacing

[jayws6]

are they smog or racing headers

[84ta406]

Hey man I think I'm gonna pass on the cam. Dont think the newer style cam will work with my block.

[Suicidal racing]

no prob and the headers are what they call racing..no smog shit

[ILuvPizzaTimes10]

Originally Posted by 84ta406

Hey man I think I'm gonna pass on the cam. Dont think the newer style cam will work with my block.

bolt pattern is the same and a standard/retro fit cam gear will bolt on. as long as you run a cam bushing/bearing and a button setup it will work. i know lunati sells a kit to run a "factory" roller cam on classic SBC. Just a heads up

[Suicidal racing]

^yes they do..its a retro kit if i remember right..i will say im not fimiler with hyd rollers..i have always just tossed solid rollers in my shit

[84ta406]

I already have retro fit roller lifters, and a cam button. Is that all I need?

[ILuvPizzaTimes10]

you need a smaller diameter front cam bushing/bearing because of the necked down front cam lobe. and your done.

[Suicidal racing]

left cam is the herbert hyd late model roller,right is my bullet roller..you can see the diff