Go Back   North East F-Body Association > Tech > LSX Powertrain

Reply
 
Thread Tools Display Modes
  #1  
Old 03-03-2010, 02:56 AM
ILuvPizzaTimes10's Avatar
ILuvPizzaTimes10 ILuvPizzaTimes10 is offline
YOUR ALL GUNNA DIE!!!
 
Join Date: Oct 2009
Location: Randolph, MA
Posts: 9,380
Post Thanks / Like
Thanks (Given): 21
Thanks (Received): 192
Likes (Given): 65
Likes (Received): 587
Dislikes (Given): 25
Dislikes (Received): 83
Default

classic sbc's dont need studs to hold the heads down. 5 bolts per hole. LS1's have 4 and like to leak under some cylinder pressure. N/A there fine. anything more serious in pressures either 100+ shot or 8-12 PSI and they wont hold down with out a good set of gaskets and studs. i do believe its the reason the LSX block is so popular with the extra 2 bolts per cylinder to make it a total of 6.
__________________


1998 Firebird:buncha parts thats used to make it go fast..... not so much anymore.
BAAAAAA!!!!!!
Reply With Quote
  #2  
Old 03-03-2010, 02:34 PM
Slowhawk Slowhawk is offline
choking the wrench
 
Join Date: Oct 2009
Posts: 1,526
Post Thanks / Like
Thanks (Given): 0
Thanks (Received): 55
Likes (Given): 0
Likes (Received): 250
Dislikes (Given): 0
Dislikes (Received): 5
Default

I said 224 Cam? Must of been for a FI setup. For NA I ussually go bigger.
I agree with not gasket matching anything.There will be no real gain and could possibly hurt power if not done right.If you want the ultimate I would do the Cam and a set of TSP 5.3L heads that we sell.They are $1250 -when you take off the $300 valve springs they really are just $900 more. -if you mill the stock heads that can be 100-200 so take that off and the new heads are only $700.

Truthfully-you should be doing a 6 point rollbar to be ready for this season.
Reply With Quote
  #3  
Old 03-03-2010, 08:46 PM
sciff5 sciff5 is offline
Rolling with over 50 posts
 
Join Date: Oct 2009
Posts: 114
Post Thanks / Like
Thanks (Given): 0
Thanks (Received): 0
Likes (Given): 0
Likes (Received): 0
Dislikes (Given): 0
Dislikes (Received): 0
Default

Quote:
Originally Posted by Slowhawk View Post
I said 224 Cam? Must of been for a FI setup. For NA I ussually go bigger.
I agree with not gasket matching anything.There will be no real gain and could possibly hurt power if not done right.If you want the ultimate I would do the Cam and a set of TSP 5.3L heads that we sell.They are $1250 -when you take off the $300 valve springs they really are just $900 more. -if you mill the stock heads that can be 100-200 so take that off and the new heads are only $700.

Truthfully-you should be doing a 6 point rollbar to be ready for this season.
Yeah I know but I'll be going another season at least before swapping chassis. This chassis isnt worth putting a roll bar in. I'll play around in the cones, and the corners for another year, and hopefully they'll let me race at import wars again in the 11.50 class. If they do, I'll just pat the gas the entire way down the strip and stay a fender ahead. The car was fast enough to win last year I just missed a shift.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 12:14 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.