Go Back   North East F-Body Association > Tech > LT1/TPI/TBI

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 11-17-2010, 03:25 AM
Suicidal racing's Avatar
Suicidal racing Suicidal racing is offline
Shooting for 13's
 
Join Date: Jun 2010
Location: western,ma
Posts: 275
Post Thanks / Like
Thanks (Given): 0
Thanks (Received): 0
Likes (Given): 1
Likes (Received): 4
Dislikes (Given): 0
Dislikes (Received): 1
Default

i aint heard anyone breaking a stock crank..but to let you know i will be around 800 and im not thinking twice about doing it...i also had a 327 with stock crank,stock rods with rod bolts and trw pistons and it made around 750..lol im lil diff..gm stock shit can take a hell of a beating

the rods i think are the weak point but once you do rod bolts the pistons are next in line....arp rod bolt kit for stock rods is 70$..or you could go to speedway motors and pick up a set of there forged h beam rods with arp 7/16th bolts for 250$.

Then float around and toss a cheap forged piston on the rods and bolt it all up..

like i said crank is the last thing i would sweat on the rotating assembly..rod bolts first,pistons then rods then crank.shit you might have to address the caps on the block before the crank....but make sure you get your crank checked an stuff..if you beat on her like you say.as you know its always best to mag it and make sure and turn it down if need be.
__________________
box of ls6 junk an some dope..i wish i new what i was doing
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 03:27 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.