Go Back   North East F-Body Association > F-Body Garage > Project Logs

Reply
 
Thread Tools Display Modes
  #1  
Old 04-13-2011, 07:28 PM
bottledbird68 bottledbird68 is offline
Build,beat,break,repeat..
 
Join Date: Jan 2010
Location: Athol MA
Posts: 1,980
Post Thanks / Like
Thanks (Given): 8
Thanks (Received): 19
Likes (Given): 27
Likes (Received): 74
Dislikes (Given): 12
Dislikes (Received): 4
Default

And it's up and tacked in place



All of my measurements for the frame and cradle are dead on even. It's also nice and level in the chassis.
Track width looks like it's going to be pretty good as well.

This just looks cool to me pokin out of a first gen wheel well.


So, the rails and cradle are square in the car. All dimensions side to side and cross corners are equal. Double checked factory corvette service manual and both sides are supposed to be equal. Need to do some more figuring though as the drivers wheel is a little further forward. Hoping it's just something alignment related. Ran out of time today. Had to grab the little one from school. Hopefully more tomorrow if I can find some time.
If my wheel issue is simple it won't take much to lock everything down and finish up the front. Chassis wise it's coming together nicely
__________________
The fleet...
Reply With Quote
  #2  
Old 04-09-2011, 03:02 AM
My84Z's Avatar
My84Z My84Z is offline
Post Whore
 
Join Date: Oct 2009
Location: dartmouth
Posts: 2,925
Post Thanks / Like
Thanks (Given): 4
Thanks (Received): 57
Likes (Given): 7
Likes (Received): 240
Dislikes (Given): 6
Dislikes (Received): 24
Default

Not on this site buddy!
__________________

2000 SS Procharger
98 Z vert turbo
07 TB SS cai catback and tune
Reply With Quote
  #3  
Old 04-13-2011, 08:36 PM
ILuvPizzaTimes10's Avatar
ILuvPizzaTimes10 ILuvPizzaTimes10 is offline
YOUR ALL GUNNA DIE!!!
 
Join Date: Oct 2009
Location: Randolph, MA
Posts: 9,380
Post Thanks / Like
Thanks (Given): 21
Thanks (Received): 192
Likes (Given): 65
Likes (Received): 587
Dislikes (Given): 25
Dislikes (Received): 83
Default

Thats Kick Ass!!! Tape Measure..... thats why your shit aint straight!!!!!
__________________


1998 Firebird:buncha parts thats used to make it go fast..... not so much anymore.
BAAAAAA!!!!!!
Reply With Quote
  #4  
Old 04-13-2011, 08:56 PM
bottledbird68 bottledbird68 is offline
Build,beat,break,repeat..
 
Join Date: Jan 2010
Location: Athol MA
Posts: 1,980
Post Thanks / Like
Thanks (Given): 8
Thanks (Received): 19
Likes (Given): 27
Likes (Received): 74
Dislikes (Given): 12
Dislikes (Received): 4
Default

Quote:
Originally Posted by ILuvPizzaTimes10 View Post
Thats Kick Ass!!! Tape Measure..... thats why your shit aint straight!!!!!
F ewe lol. It is straight. All the points they show to use in the factory manual are dead on square. Just the wheel is back. If I kick the subframe back then my motor will sit noticeably crooked
I'm thinking it's in the alignment settings. I just kind of tossed all that together to make the chassis a roller so I'm hoping that's it. Otherwise it's a bent control arm or something?
__________________
The fleet...
Reply With Quote
  #5  
Old 04-13-2011, 08:58 PM
Formula413's Avatar
Formula413 Formula413 is offline
Moderbator
Asteroids Champion
 
Join Date: Oct 2009
Location: In the Northeast dreaming of the Southwest
Posts: 5,603
Post Thanks / Like
Thanks (Given): 0
Thanks (Received): 141
Likes (Given): 0
Likes (Received): 647
Dislikes (Given): 0
Dislikes (Received): 39
Default

Well it's not like those suspension parts came out of wrecked car or anything. Oh, wait...
__________________
Alex



GRAMMAR HOW-TO
Reply With Quote
  #6  
Old 04-14-2011, 03:01 AM
irockidz28's Avatar
irockidz28 irockidz28 is offline
Do It In A Third Gen
 
Join Date: Oct 2009
Location: Franklin Ma
Posts: 2,953
Post Thanks / Like
Thanks (Given): 47
Thanks (Received): 26
Likes (Given): 242
Likes (Received): 105
Dislikes (Given): 1
Dislikes (Received): 6
Default

^took the words right out of my mouth lol
__________________

1986 Camaro Iroc z28 305 TPI 700R4
-hooker-edelbrock 1 5/8" shorty headers-1.6 roller rockers-52mm TB-3.23 10 bolt- ...191rwhp/280rwtq...14.97@90.5 2.04 60'

2005 GMC Sierra 2500 LLY Duramax -exhaust-gauges-leveled-wheels-tune-egr delete....339rwhp/637rwtq
Reply With Quote
  #7  
Old 04-14-2011, 05:17 AM
black heartbeat black heartbeat is offline
Post Whore
 
Join Date: Oct 2009
Location: Mashpee, Cape Cod
Posts: 1,273
Post Thanks / Like
Thanks (Given): 4
Thanks (Received): 18
Likes (Given): 22
Likes (Received): 76
Dislikes (Given): 1
Dislikes (Received): 3
Default

looking good man!
__________________
Reply With Quote
  #8  
Old 04-15-2011, 04:34 AM
TBerry95z28 TBerry95z28 is offline
jdmkilla
 
Join Date: Feb 2010
Location: NH
Posts: 1,115
Post Thanks / Like
Thanks (Given): 1
Thanks (Received): 2
Likes (Given): 2
Likes (Received): 8
Dislikes (Given): 4
Dislikes (Received): 0
Default

lookin good so far! keep workin I wanna see it done lol
__________________
2009 CBR 600RR- The toy
2009 Chevy 1500- The DD
2012 Corrola- Wife's gas sipper.
Reply With Quote
  #9  
Old 04-16-2011, 04:39 PM
bottledbird68 bottledbird68 is offline
Build,beat,break,repeat..
 
Join Date: Jan 2010
Location: Athol MA
Posts: 1,980
Post Thanks / Like
Thanks (Given): 8
Thanks (Received): 19
Likes (Given): 27
Likes (Received): 74
Dislikes (Given): 12
Dislikes (Received): 4
Default

Quote:
Originally Posted by TBerry95z28 View Post
lookin good so far! keep workin I wanna see it done lol
Me too lol.
Spent a couple hours yesterday crawling around with a tape measure double, triple, and quadruple checking everything.
I'm completely satisfied that the vette stuff is square in the first gen subframe.
What I'm thinking my issue is that when I start trying to measure off the original sheet metal parts of the car things start to get a little funny. So, I'm thinking my 43 year old rusted, twisted, and fatigued sheet metal may not be the best or most reliable point to measure from lol.
That and my other half pointing out how the drivers side factory frame mount to the body actually sits about a half inch further forward on the car. Guess the car was never really square anyhow. Couldn't imagine why lol.
So, time to chop out the old subframe connectors (they need to go anyhow for the truck arms), shift the subframe back a half inch, and start mocking up the rear to make sure I'm square before I finish weld everything.
More updates next week hopefully. Took the Camaro out for a beat run the other night and now I'm really itching to get my baby back together
__________________
The fleet...
Reply With Quote
  #10  
Old 04-16-2011, 10:34 PM
DavidS's Avatar
DavidS DavidS is offline
Missing a 67
 
Join Date: Jun 2010
Location: Granby, CT
Posts: 2,431
Post Thanks / Like
Thanks (Given): 370
Thanks (Received): 75
Likes (Given): 481
Likes (Received): 266
Dislikes (Given): 1
Dislikes (Received): 6
Default

Quote:
Originally Posted by bottledbird68 View Post
now I'm really itching to get my baby back together
It's looking GREAT!!!! Some of us are itching to see it at next years Quabbin Cruise!
__________________

68 Camaro (?350 SB)
69 Camaro (L72 427 BB)
69 Camaro (DZ 302 SB - www.z28.net)
Camaro - A friendly flying car – from the French - the first half "camarade/friend" and the last half “aero/of the air".
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:15 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.