ZFreies Build and Questions

[ZFreie]

Originally Posted by ILuvPizzaTimes10

who knows why But sucking hot ass air from the top of the radiator makes less sence the sucking it from the wheel well. regardless of intake tubing length. hey if your happy with it SWEET!

Hot air is exiting the fans on the BACK of the radiator, not the front. so it gets cold air all the time as the filter element is BEFORE the radiator in the path of air.

Cold air---->airfilter------> rad------>hot air

I might entertain heat soak from the lid being on top of the rad support and the lid getting hot and thus making the air hot but there is no way its sucking in "hot air".

Originally Posted by Z28

The dip looks good. How many coats you use?

I used 4 or 5 light coats, vs the heavier coats like the can says to use.

Originally Posted by frankzlt1

How are reprogramming your computer to your new gears?

Tuner cats, have aldl cable and just plugged in the gear change into the tunercats auto adjust thing. Klab told me about it, didnt know it existed before lol

[Formula413]

Honestly if it were simple I'd probably swap to an LS1 style intake just for ease of access. Beats jacking up the car and pulling the skid plate just to get at the damn air filter. And you could run a paper filter. But I think the Moroso or a comparable CAI flows plenty for a mildly modded LT1.

[Slowhawk]

I think pizza is saying the hot air during idle and not moving. I've seen inlet temps hit 150+ in traffic on LS cars with the bottom cut out.

[ILuvPizzaTimes10]

yeah thats what i mean. my lid gets very hot sitting in the lanes. had to move the IAT sensor so it wouldnt pull 4 degrees out of timing.

[SLP IROC-Z]

Zfreie you should buy this off me, chrs1313 ram air kit

[ZFreie]

Originally Posted by ILuvPizzaTimes10

yeah thats what i mean. my lid gets very hot sitting in the lanes. had to move the IAT sensor so it wouldnt pull 4 degrees out of timing.

Ill have to check mine and see, there is alot of open space tho

Originally Posted by SLP IROC-Z

Zfreie you should buy this off me, chrs1313 ram air kit

I would but my lid is far from a normal setup, id prob have to make one for it to fit correctly.

[ZFreie]

Well all cylinders were with in 205-210psi

should I repeat the test now and add some oil to cylinders to make sure my compression tester is accurate?

Pictures of plugs







Seems like alot of carbon buildup, guessing from the oil it burns. I'm stull having oil blown out of the dipstick ect, if the compression test is right I should have really solid motor for 180k, so how is my engine getting the crankcase pressurized?

[ILuvPizzaTimes10]

when you pulled the intake did you pull the lower pan off and clean the PILE of sludge out of it?

[My84Z]

I'd also lean towards pcv. Try changing the pcv valve and cleaning the sustem

[ls6monte]

https://www.facebook.com/groups/2078...group_activity

Don't know if you're on facebook at all but my friend has a 70k LT1 for sale for decent money. Billy Fowler is his name(if the post doesn't redirect you to the thread.)