#1
|
||||
|
||||
![]()
Its been talking a while to actually get this car, but this week HOPEFULLY I am picking up a 95 Buick Lesabre for a winter beater/ possible new summer dd. Some lazy ass wiki research told me:
"The LeSabre's engine from 1992-1995 was the 3800 V6, which produced 170 hp (127 kW) and 225 ft·lbf (305 N·m) The 3513 lb (1593 kg) car got 18 mpg (13.1 L/100 km) in the city and 28 mpg (8.4 L/100 km) on the highway, which was slightly better than the 1991 model. The car accelerated to 60 mph (97 km/h) in a respectable 8.9 seconds and could cover the quarter mile in 16.9 seconds at 80 mph (129 km/h). Top speed was electronically limited to 108 mph (173 km/h)." So is this the same motor as in the 93-95 V6 Camaro's? I thought they had 3.4L's at first and didn't get the 3.8L's till like 97 or 98? I don't know much about the 90's era V6's and yall should teach me more about them, am I gonna be able to slap the V6 GTP top end on this fucker???? hahahaha ![]()
__________________
![]() 95 Z28 hard top - LT1 | 4L60e | bolt ons | Yank SS3600 | suspension | viking coil overs | 3.42 10 bolt | 3520 lbs - 12.331 @ 108.22mph 1.668 60' 08 Saab 9-7x - L96 6.0 swap | L92 heads/intake/TB | LS6 cam | LS9 springs | 7.425" hardened pushrods | CAI | 1-3/4" stepped LT's | catback | 4L60E | FTI 3000 278mm converter |
#2
|
||||
|
||||
![]()
Oh yeah, its got 120k on the clock, looks real good other than clear coat peel on trunk lid. But interior is real clean, ex grandpa owned. Only think I noticed is the friggin screraming power steering pump hopefully it jjust needs fluid maybe its got a leak or something or needs a new pump.
![]()
__________________
![]() 95 Z28 hard top - LT1 | 4L60e | bolt ons | Yank SS3600 | suspension | viking coil overs | 3.42 10 bolt | 3520 lbs - 12.331 @ 108.22mph 1.668 60' 08 Saab 9-7x - L96 6.0 swap | L92 heads/intake/TB | LS6 cam | LS9 springs | 7.425" hardened pushrods | CAI | 1-3/4" stepped LT's | catback | 4L60E | FTI 3000 278mm converter |
#3
|
||||
|
||||
![]()
i know the 3800 motor in the 98-02 camaros my buddy used to have one and it is a buick engine im not sure when they were acctually in the buicks
__________________
![]() 1986 Camaro Iroc z28 305 TPI 700R4 -hooker-edelbrock 1 5/8" shorty headers-1.6 roller rockers-52mm TB-3.23 10 bolt- ...191rwhp/280rwtq...14.97@90.5 2.04 60' 2005 GMC Sierra 2500 LLY Duramax -exhaust-gauges-leveled-wheels-tune-egr delete....339rwhp/637rwtq |
#4
|
||||
|
||||
![]()
3.8s start coming into the fbody scence half way threw 95. Most of the 95s were cali models. 96 was the first full yr that the 3.8 came in the fbodies which did away with the boat anchor 3.4. 3.8s a good strong motor which is almost unbreakable (unless i drive it). I killed my 3.8 a week before i picked up my LT1.
__________________
![]() 06 CTSV 08 Spec B Sold 00 Yukon SLT Sold 05 STI Sold 02 WS6 Sold 12/1/12 94 1LE Sold 3/18/11 02 WRX Sold 2/18/12 Drag racing a car thats been totaled is like fucking a hooker with no rubber. Either way your a stupid fuck. |
#5
|
||||
|
||||
![]()
Now I wonder if its got the LN3 or the L27? I'm guessing it would be the L27, which has two piece intake upper/lower plenum. With the LN3 you can put the supercharger intake on it because it is one piece and you can use the stock heads. DAMN! Wish I had an LN3!!! hahahaha I <3 wikipedia
![]()
__________________
![]() 95 Z28 hard top - LT1 | 4L60e | bolt ons | Yank SS3600 | suspension | viking coil overs | 3.42 10 bolt | 3520 lbs - 12.331 @ 108.22mph 1.668 60' 08 Saab 9-7x - L96 6.0 swap | L92 heads/intake/TB | LS6 cam | LS9 springs | 7.425" hardened pushrods | CAI | 1-3/4" stepped LT's | catback | 4L60E | FTI 3000 278mm converter |
#6
|
|||
|
|||
![]()
It's an L36 series II and it's actually 205 hp by 230 torque. And yes you could do a top squap from a gtp, for an m90 supercharger on that engine as long as you change the heads to that of an L67 series II. But you'd need to change the connecting rods and pistons to either aftermarket diamond pistons or use the internals from a 3800 gtp block (all forged)
|
#7
|
||||
|
||||
![]()
Nooo I'm pretty sure its a series I it said it on the engine cover anyways... I wouldnt go that far into the swap lol I'd just slap the supercharger intake on the stock motor and tune it. LOL stock internals can be left.
__________________
![]() 95 Z28 hard top - LT1 | 4L60e | bolt ons | Yank SS3600 | suspension | viking coil overs | 3.42 10 bolt | 3520 lbs - 12.331 @ 108.22mph 1.668 60' 08 Saab 9-7x - L96 6.0 swap | L92 heads/intake/TB | LS6 cam | LS9 springs | 7.425" hardened pushrods | CAI | 1-3/4" stepped LT's | catback | 4L60E | FTI 3000 278mm converter |
#8
|
||||
|
||||
![]()
It should be a series one in that car, either way it is a good solid motor and should serve you well.
__________________
-Nick 9/11/01 NEVER forget! |
#9
|
||||
|
||||
![]()
Yay sounds like I should get a lot of life out of it with only 120k on the clock right now...
__________________
![]() 95 Z28 hard top - LT1 | 4L60e | bolt ons | Yank SS3600 | suspension | viking coil overs | 3.42 10 bolt | 3520 lbs - 12.331 @ 108.22mph 1.668 60' 08 Saab 9-7x - L96 6.0 swap | L92 heads/intake/TB | LS6 cam | LS9 springs | 7.425" hardened pushrods | CAI | 1-3/4" stepped LT's | catback | 4L60E | FTI 3000 278mm converter |
#10
|
||||
|
||||
![]()
right up until you fuck with it
__________________
-Nick 9/11/01 NEVER forget! |
![]() |
Thread Tools | |
Display Modes | |
|
|