|
#1
05-02-2013, 10:34 PM
|
||||
|
||||
Made a few passes
Went to test n tune at Lebanon Valley last night for a few runs. Haven't changed anything on the car so no reason to expect anything different but what the heck. Yes I have the slowest 4th gen in the club. Eat shit.
 First run: no burnout, dead hooked 60' - 2.018 ET - 13.801 MPH - 99.8 That was actually my best 60' ever by a hair. ET was just a few hundredths off my best time. Probably shouldn't have filled up the tank before I went. Second run: no burnout, spun a little 60' - 2.194 ET - 13.888 MPH - 100.19 That is the car's best trap speed yet, and only the second time it trapped over 100 mph. The wheelspin probably actually helped. Third run: burned out, still spun 60' - 2.201 ET - 13.958 MPH - 99.5 This run I not only spun on launch but it got a little loose on the 1-2 shift too. I decided to call it a night after that because I didn't want to put the car into the wall. 2nd and 3rd runs were in the right lane so I'm guessing it wasn't prepped as well or was just a little slick. Despite only having a 2.0 60' the car felt like it left great on that first pass. Every run was launching off idle. Nitto 555Rs at 25 psi. 
|
|
#3
05-03-2013, 01:34 AM
|
||||
|
||||
|
Didn't want to put into the wall? On a 13 second pass? I did it and didn't even pass the 60' mark!! lol
Nice runs Alex.
__________________
 Ron85 Monte SS, 2004 Corvette LS6 w/02 T56, 9" rearend, 390/364 rwhp/tq ,Slowhawk tuned, 3575 lbs 11.74@114.6mph BACK IN THE GAME!! DD 06 Cobalt SS/sc, stock w/k+n only 14.78@97mph http://www.cardomain.com/ride/2151623 http://www.racecarsbyhalls.com http://www.slowhawkperformance.com Another show Lady- Why does your car say Corvette on the engine? We have a Corvette and your car doesn't look like one. LMFAO
|
|
#4
05-03-2013, 01:42 AM
|
||||
|
||||
|
Doesn't take much power to lose it on a slick track!
|
|
#5
05-03-2013, 10:35 AM
|
||||
|
||||
|
I didn't know street night started up ill try to make it next week.
__________________
 1999 Camaro SS480 http://www.youtube.com/watch?v=hGXXuq9T2TI G,M. Precision Welding and Fabrication GMPrecisionWelding@gmail.com
|
|
#7
05-03-2013, 03:44 PM
|
||||
|
||||
|
It's perfect for brackets but I can't cut a good light consistently. Had an .020 but also a red light and a .1xx.
|
|
#8
05-04-2013, 01:10 AM
|
|||
|
|||
|
Yeah consistency is key. But you are getting the experience and having fun with it. That's all that matters man.
__________________
There is no replacement for displacement... 99 Camaro Z28 M6 - Sold Aug 2013
|
|
#9
05-04-2013, 01:47 AM
|
||||
|
||||
|
Very cool Alex!
I definitely see you bracket racing at some point.
__________________
 68 Camaro (?350 SB) 69 Camaro (L72 427 BB) 69 Camaro (DZ 302 SB - www.z28.net) Camaro - A friendly flying car – from the French - the first half "camarade/friend" and the last half “aero/of the air".
|
|
#10
05-04-2013, 04:48 AM
|
|||
|
|||
|
pretty good numbers for your mods! play with the tire pressure to get just the right amount of spin, 1.9x 60 and bottom 13.70s
__________________
 1999 Z28 T-Top M6 - LS6, Bolt Ons, Suspension, MWC Narrowed 9" - 415rwhp 385rwtq 10.847 @ 125.17 1989 IROC-Z H/T M5 2006 F350 SCSB 4x4 6.0L Diesel - Studs, EGR Delete, Powermax Turbo, Extreme Tuning & Exhaust - 13.23 @ 101
|
 |
|
|
Asteroids
Linear Mode
