Wolfe anti-roll bar installed

[smokinss]

Finally got my Wolfe anti-roll bar welded in. Came out really nice and I could already tell a difference in the way the car leaves on the street. No more body roll in the back and a much more solid feel.

[camarokid91]

Nice addition to the car.That looks brutally stiff but I guess that's what you want for drag racing.

[SLP IROC-Z]

Nice! Im interested to see how to helps your 60s.

[KLAB]

Me too. How does it feel in corners too.

[smokinss]

It drives good but its not intended for cornering hard. Its so stiff that I have heard the back end can come around on ya on a sharp turn if you are going fast.

After getting the car on the ground it appears that we need to re weld the tabs a little higher up on the frame.

[camarokid91]

Originally Posted by smokinss

It drives good but its not intended for cornering hard. Its so stiff that I have heard the back end can come around on ya on a sharp turn if you are going fast.

After getting the car on the ground it appears that we need to re weld the tabs a little higher up on the frame.

Yeah I would recommend not pushing it on corners it might be the end of your car.

[smokinss]

Got the tabs welded up higher on the frame. Bar is where it needs to be now.

[Slowhawk]

Much better now.

[SLP IROC-Z]

looks better but still a little low though?

[smokinss]

Originally Posted by SLP IROC-Z

looks better but still a little low though?

Yeah that's the down side to this setup. But in all reality the bar is only about an inch or so from the bottom of my 9 inch housing. I don't for see it hitting anything.