|
#31
|
||||
|
||||
|
Agreed, but TFS kills them in the low and mid range which would be preferable for a car mostly driven on the street, IMO anyway. Once again you throw peak dyno numbers in the garbage with the other numbers, in the scheme of thing they only tell you part of the story. I don't care if the car makes 50 more HP at peak RPM if the "lesser" heads make more power across 80% of the RPM range then the only place you are really gonna see an advantage with the higher HP number is on the racetrack, and chances are it will be a negligible difference. I will take bigger low/mid range numbers over peak HP any day of the week in any application except a pure track car
__________________
-Nick 9/11/01 NEVER forget! |
|
#32
|
||||
|
||||
|
^ This is why I research stuff..
Peak numbers don't mean as much to me. I look at lot at the mid-lift and middle of the powerband numbers. My buddy has an MS4 with PRC heads and he swears by it, but I pulled on him even though he made more power than I did. I've driven it and I don't care for it as a street cam. I've noticed that TR seems to pay more attention to all around performance and TSP seems to be just peak power. I figured that out a couple years ago.The TFS also runs a lower valve angle which can also help run a different range of cams due to a slightly less risk of PTV clearance.
__________________
h/c/i/s/e
|
|
#33
|
|||
|
|||
|
I won't buy AFR heads anymore. Build quality sucks. We mostly prefer to use TEA/TFS heads. They always outperform AFR,ported TSP heads ect.
|
|
#34
|
|||
|
|||
|
Quote:
__________________
5.3L LSx, Fbody .500 cam, TH400, 4500 Stall, Moser 9" |
|
#35
|
||||
|
||||
|
I'm torn.
I've seen all the data and I'm just still worried about losing low end on the 102. I've got the money to buy it now. Just last minute jitters, I guess.
__________________
h/c/i/s/e
|
|
#36
|
||||
|
||||
|
I think the 92 or 90 would be a better fit for you if you can get your hands on one.
__________________
-Nick 9/11/01 NEVER forget! |
|
#37
|
||||
|
||||
|
Between the bad things I've heard about the 102 and just the fact that it's huge and your motor is stock cubes and not too radical a cam it doesn't seem like a good fit to me. Have you heard good things about it in your research?
|
|
#38
|
||||
|
||||
|
I would almost go LS6 or an LS2 intake over a 102.
__________________
-Nick 9/11/01 NEVER forget! |
|
#39
|
||||
|
||||
|
^ The LS6 outperforms the LS2. LS2 is a turd compared to the 6 and 3. The TB size doesn't make the intake and has little to do with it. I've learned a LOT this week..
![]() As I see it, the 102 is almost an ITB intake wrapped in polymer/plastic. Check it.. This settles it. Quote:
__________________
h/c/i/s/e
|
|
#40
|
||||
|
||||
|
i dont agree with that completely. larger intake runners on an engine say at at low rpm and low vacuum. the air can stall in the ports. too big a plenum on a small displacement engine spinning at low rpm/high load will stall air inside the plenum. i mean believe what you wwant. real world is real world not some engine dyno/chassis dyno and the car made 40 more rwhp but ran 3 tenths slower...... i mean get it if you wish. if you choose to believe a guy who ultimatly is a sales man for FAST. of course he's going to tell you its great. and you wont lose anything. there are back to back tests on this i believe hot rod did it and the 102 lost everywere but peak over the 92/92 setup SAME 92mm tb. if i read it right.
__________________
![]() 1998 Firebird:buncha parts thats used to make it go fast..... not so much anymore. ![]() BAAAAAA!!!!!! |
![]() |
|
|