|
#61
|
||||
|
||||
|
^ Yeah, that's what I was reading. Neat stuff. I've been back and fourth about the SD thing. From what I gather, it goes off the VE tables (IIRC) and compares to the MAF data. So it's running off an "idea" of how much air is coming into the engine based on set parameters. again, IIRC. Half the crowd tells me to keep it until Mods dictate deleting it and the other half say go SD.
What happened to yours anyway?? last I paid attention it was down and you decided to keep it.
__________________
h/c/i/s/e
|
|
#62
|
||||
|
||||
|
Dude you are well within the parameters for MAF control on your car, you are making it more complicated than it has to be. Keep the MAF, it will run better overall because it can make more automatic adjustments than an SD tune. Even a stock MAF will not be a bottleneck for you and can be tuned for what you are doing, if you are sweating it get the AC delco screened 85MM MAF with the adapters for the wiring. Pizza car is ALOT different than what you are trying and SD was the best way for him, but for a HC 346 I wouldn't even try. And I bet the 102 is gonna be wrong for what you are talking about, I will go on record now. You will make lots of HP above 4500 and that'll be it. Hopefully you prove me wrong. If you are going to do fuel rails go for the billet ones, and I am a big fan of Nick Williams TB's. Not sure what ebay T/B you are talking about but I would do it once and do it right.
__________________
-Nick 9/11/01 NEVER forget! |
|
#63
|
||||
|
||||
|
^ I'm not pushing the SD idea. It didn't get far with me.. And the LT1 is a different platform. I don't compare anything about my stuff to that.
Already got an 85mm TB based on other advice I've gotten here. I think from Don, but don't quote me on that one. I wanted the NW TB, but I haven't decided yet.. There's a thread floating around Tech about the eBay TB's. From what I've heard it's the same casting as the name brands, but minus the name. I'll have to look it up as I haven't done much reading on it at all. And only way to tell how this is all going to pan out is to get it running and to get it tuned. I'll prolly have to trailer it as I've read one or two threads about fresh 102 installs that don't want to idle. No big deal for me, I'll figure it out. -=EDIT=- Here's the TB. Looks identical to the FAST. http://cgi.ebay.com/ebaymotors/GM-GE...ht_3454wt_1042 Thread: http://www.ls1tech.com/forums/genera...le-bodies.html
__________________
h/c/i/s/e
|
|
#64
|
||||
|
||||
|
i just feel no maf simplifies a modded car. it may cause a fuel economy suffer. but other then that i dont really see the benifits of running one on a car modified much past stock bolt ons. maybe its me.
__________________
![]() 1998 Firebird:buncha parts thats used to make it go fast..... not so much anymore. ![]() BAAAAAA!!!!!! |
|
#65
|
||||
|
||||
|
^ Meh.. I don't really know much better. I just see the LT and LS as two completely different setups. All I knew was that the LT was a MAP setup/SD. I didn't think they had a MAF setup.
__________________
h/c/i/s/e
|
|
#66
|
|||
|
|||
|
They did have some with MAF's I know my dads 9C1 caprice is a MAF car.
__________________
5.3L LSx, Fbody .500 cam, TH400, 4500 Stall, Moser 9" |
|
#67
|
||||
|
||||
|
94-97 LT1s use a MAF, 92-93 are SD
|
|
#68
|
||||
|
||||
|
^ I thought it may have been the later models with the MAF. Was wondering if I DID see one on a TA with a CAI.
__________________
h/c/i/s/e
|
|
#69
|
||||
|
||||
|
LT and LS have little to do with how an engine will run based on moddifications and tuning. my car is also running an LS computer hence it runs as if it was an LS. and it runs Awesome just the way it is OL/SD!! and i like it that way. one less then to go bad/fuck up. once you start moving the maf from stock locations, adding "cold airs" lids Oiled air filters your asking for maf issues.
__________________
![]() 1998 Firebird:buncha parts thats used to make it go fast..... not so much anymore. ![]() BAAAAAA!!!!!! |
|
#70
|
||||
|
||||
|
^ I mean it's just a different platform. They all use, essentially, the same sensors to monitor and control engine activities. I forgot you're running an LS harness. I just don't compare the two sides. I don't know much about LT series other than the Opti setup and that long tubes are murder to install.
![]() I've been running a K&N since 2000 or so on my cars and haven't had a problem. Just be easy on the oil, only apply to the outside, dab up any extra and let it dry for a while before using it. And I did some experimenting/testing this winter: http://ls1tech.com/forums/generation...-argument.html
__________________
h/c/i/s/e
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|