Go Back   North East F-Body Association > Tech > LT1/TPI/TBI

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #8  
Old 10-24-2010, 09:39 PM
ILuvPizzaTimes10's Avatar
ILuvPizzaTimes10 ILuvPizzaTimes10 is offline
YOUR ALL GUNNA DIE!!!
 
Join Date: Oct 2009
Location: Randolph, MA
Posts: 9,380
Post Thanks / Like
Thanks (Given): 21
Thanks (Received): 192
Likes (Given): 65
Likes (Received): 587
Dislikes (Given): 25
Dislikes (Received): 83
Default

CC304 cam with 1.5 rr's is the only off shelf cam and LT1 spring will take. the springs coil bind at 540 lift. so the hot cam on 1.5 rockers MAY be be ok but its a much more aggressive profile and will float up top. and with the cc304 cam on a stock tune with a maf and the car should run clean on the whole curve with out much or any tuning. DO NOT reuse the timing chain. if the motor has low to moderate miles an HD chain alone will work fine other wise the stock stamped link type chain they use does a number on the cam gear. depending on what year? will determine what timing set you can use. i HOPE its a 1995+? so you can use the LT4 HD setup. Good Luck.
__________________


1998 Firebird:buncha parts thats used to make it go fast..... not so much anymore.
BAAAAAA!!!!!!
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 07:12 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.