88 notch drag car project.

[Suicidal racing]

Well i been thinking about doing this and the phone call i got today sealed the deal..im slap burnt out so my car i was doing is forsale.I have a open ct title for it and bill of sale which i will give you along with new bill of sale from me.

2800$..,hoods been sold also..i have alot more in it then that.but i know this sport so i know ill get pennys on the dollar for it all really.front is all bolted on and just needs to be dropped on the ground with weight in it and then tightened to tq specs,rear is out but might be back in this week.will trade for a 78-81 bu,70s camaro,68-72 chevelle,chevy 2,68-73 nova projects..dont have to have engines can be rollers not looking for rust buckets either though.

body
car has no rust holes or dents an has factory glass
no deck lid because i was going glass..stock mounts are still attached so just bolt on a reg one and your good.
Doors have been cut and lighted to the extreme with lexan bolted in..doors are around 35#s each now,i have stock glass still and believe the inner panels if some one wants to weld them back on..door panels can still be hung with out them though.
Drivers door sags and pass door needs outside handle easy fix..i was going to get motor city hinges so i could pull the doors on and of easy..
extend cowl 5.5 pin on hood that came off a turbo car so there is a circle notch at the front..easy fix.
car has bumper covers but no bumper under it nor mounts
have rear tail light housings
front have no lights but black head light covers,was going to run small fog lights behind them to get around light rules.

chassis
Car has a 6pt
tube style weld in frame connectors
door bars are odd because they put the main bar on the tq boxs.i was going to cut them out an put new ones in once i had it converted over to 10pt

suspension
front
new aje uni k mem,i have chevy mounts for it
upr lower a arms
new strange adj shocks and coil over setup
qa1 14"x130# coil springs
new upr caster camber plates
stock mustang steering rack with looped hose
rear
upr double adj uppers
upr single adj lowers
stock v8 coil springs with 3/4 coil cut
stock shocks,hadn't decided if i was going dbl or single adj stuff yet

rear end
8.8 rear end,still needs to be cut for c clip elems,been waiting for my buddy to cut the center out the old drum backings and sn95 caliper brackets for me..if he does it next week ill put the rear together and back in the car.
moser 33 spline axles,5 lug wit 1/2 studs
moser c clip elems on axles
moser full spool
motive 3.73 gear
broke my old diff support.so stocker goes with it.

brakes
new linc 5 lug rotors an stock stang calipers
sn95 disk stuff for conversion on the rear
new areospace manual master cylinder brake kit,not installed
all brake lines are off,was just going to plum new ones in.

interior
has stock gutted black dash,its just the shell
stock stripped stearing column with grant wheel
kirkey prostreet seat 17.5" wide one with black seat cover
holcomb steal mount
have now out dated simpson 5 pt cam loc harness for the car.
i have 2 door panel sets for it that are grey
have back seat plastics that are grey..
will toss in can of paint to make the grey stuff black.
i might have other interior parts but not sure..i only kept the stuff above so i could run some x275 stuff if i wanted to.

weld pro star rims powder coated semi flat black
15x3.5 rims with good yr front runners that have half life left
15x8 rims with mt 28x10.5 stiff slicks,only have 10 1/8th mile passes on them

electical there is none in the car,believe i still have the front head light harness and i cut 2 plugs off the rear harness to keep an wire in for tail lights at the track.

fuel nothing is plumbed in the car,,was going to use a front mount set up and a 3 gal alum upright cell with fittings gos with the car.also have stock tank that i pulled out of it if some one want that.

car is located in springfield,ma..heres some old pics but i will get new ones..easier to just check the car out really.would make a great father and son winter project or a lil track only grudge car.also will toss in a th400 that can be used for a core if wanted.haves tock 4 lug axles and maybe old posi to go with it.

pic

[ILuvPizzaTimes10]

damn man that sucks!!! good luck on the sale!

[Suicidal racing]

I hate to do it but been laid off for a bit..sick of dumping tons of cash into something that i will barely use..i work 2nd or 3rd shift an sometimes the weekends so i dont have much time to go to the track really..honestly i doubt it will sale probley..so more then likely i will be junk yard hunting to swap it over to street trim..but im a chevy guy so would rather cruise a chevy..i only got the stang because of the weight factor..

[Suicidal racing]

3k cash takes it..will have it back to a basic roller come this weekend..im 100% sure im out of this sport..

[Suicidal racing]

still have it

[Suicidal racing]

Well changing my mind will part it out..

250$ for the extended cowl hood

whole front end 1k with manual brake set up,thats new aje uni k member,new strange adj struts,new strange coil over kit,qa1 130# springs,upr a arms,new linc 5 lug rotors,v8 spindles an new upr caster camber plates.an stock rack..whole front sub frame drop out with suspension.

rims an tires 800$,rears are pro stars,15x8 5.5bs powder coated semi gloss black,28x10.5 mt stiffs with around 10 1/8th hits on them with short burn outs,fronts are pro stars same color and have 28" good yr front runners with half the life left.these are 5 lug

rear end 600$,33 spline moser axles,motive 3.73 gears,c clip elems,full spool,axles have 1/2 studs,also comes with un cut housing,old mustang stock parts an sn95 brake stuff to turn it into rear disk brakes

upr upper and lower adj a arms,bottoms are single adj with spring perchs and tops are dbl adj with good rod ends 200$

car body,bare chassis,no seat or steering wheel,just the shell,missing deck lid and hood,comes with gutted doors that have lexan bolted in and most the interior pieces..has tube sub frame connects and 6pt cage..title as said above 400$
__________________

[Suicidal racing]

hood is sold

[black heartbeat]

I have a buddy at work that has one of these and might be interested in parts, i'll let him know

[Suicidal racing]

Alright sounds good..thanks

[Suicidal racing]

Front Suspension










Rear Suspension




Wheels an Tires