|
#1
04-24-2011, 02:24 AM
|
|||
|
|||
Custom V-Band Shorty Headers for Turbo LSX
Up for sale are my modified headers I was going to use for my turbo setup.
These things are brand new and have never been run. I started with a set of Dougs 98-99 fbody shorty headers. I removed all the emissions bs, welded up the holes, smoothed everything out and had 2.5" stainless v-bands professionally tig welded on. Included is the other half of the v-band assemblies so you can customize your own turbo cross-over. This is a FAR more attractive setup in comparison to the typical truck manifolds. Also, the tig was finished all the way around the outside of the exhaust flange (from the factory Dougs only welds the top and bottoms) 1-5/8 primaries with 2.5" collectors! 350.00   
|
|
#2
04-25-2011, 02:23 AM
|
||||
|
||||
|
will these fit a saturn SL2??
__________________
 95 Z28 hard top - LT1 | 4L60e | bolt ons | Yank SS3600 | suspension | viking coil overs | 3.42 10 bolt | 3520 lbs - 12.331 @ 108.22mph 1.668 60' 08 Saab 9-7x - L96 6.0 swap | L92 heads/intake/TB | LS6 cam | LS9 springs | 7.425" hardened pushrods | CAI | 1-3/4" stepped LT's | catback | 4L60E | FTI 3000 278mm converter
|
|
#3
04-25-2011, 02:37 AM
|
||||
|
||||
|
The look sooo nice and shineyyyy I want them. Need an LQ first!
__________________
95 Z28 hard top - LT1 | 4L60e | bolt ons | Yank SS3600 | suspension | viking coil overs | 3.42 10 bolt | 3520 lbs - 12.331 @ 108.22mph 1.668 60' 08 Saab 9-7x - L96 6.0 swap | L92 heads/intake/TB | LS6 cam | LS9 springs | 7.425" hardened pushrods | CAI | 1-3/4" stepped LT's | catback | 4L60E | FTI 3000 278mm converter
|
 |
|
|
Linear Mode
