|
#1
|
||||
|
||||
|
I was swapping the tow wire shackle out on the scallop dredge the other day on the boat I work on. I grabbed the 1st wrench I saw which was a pair of vice grips to get the rake back fishing asap.. shoulda took another minute to locate the adj wrench tho
![]() I was wrenching on it at face level and the vice grips slipped off as I was trying to tighten it the last little bit with both hands and smack! nailed myself with the round adjusting nob on the bottom of the vice grips. It just felt like some one punched me in the face and my automatic reaction was to spit the shit in my mouth out which was the remains of my front teeth. We got in in-time to catch a dentist luckily, he put a temporary cap on my front left tooth which only looks half of it broke off but really it was totally broken a tad below my gum line. the front right tooth broke into 4 different pieces(u can see the cracks if u look closely) he knocked off the left piece but the right piece goes up into my gum line in the back so I need to go back in friday for a more complicated procedure, if I don't knock it out before then. and the dentist even stitched up both sides of the hole going through my lip ![]() de de dee
__________________
-Dusty '96 z28 built T56, AI 226/234, crane gold's 1.6I/1.5E, cc918's, CC 'R' lifters, CM PR's, imp HG's, 30# SVO's, becool rad, ps mids, 2OTL borla w/ DMH plate & TD, u/d pullies, MSD 6AL & wires, TR55's, 160tstat, LT4 KM, madtuner, !AIR!, !EGR!, !CAT!, LS1 DS, poly mounts, powerslot/hawk HP+, hotchkis LCA's, centerforce df, pro5.0, !168.5#'s! LE2's waiting 2b installed |
|
#2
|
||||
|
||||
|
Oh shit man, that looks painfull...hope you feel better / get it fixed.
__________________
95 Z28 A4~Sold~ Quote:
|
|
#3
|
||||
|
||||
|
holy shit!
__________________
![]() 12.8@112 |
|
#4
|
||||
|
||||
|
OUCH!
__________________
1972 Procharged Trans Am |
|
#5
|
||||
|
||||
|
__________________
Ron85 Monte SS, 2004 Corvette LS6 w/02 T56, 9" rearend, 390/364 rwhp/tq ,Slowhawk tuned, 3575 lbs 11.74@114.6mph BACK IN THE GAME!! DD 06 Cobalt SS/sc, stock w/k+n only 14.78@97mph http://www.cardomain.com/ride/2151623 http://www.racecarsbyhalls.com http://www.slowhawkperformance.com Another show Lady- Why does your car say Corvette on the engine? We have a Corvette and your car doesn't look like one. LMFAO |
|
#6
|
||||
|
||||
|
yeah its not to nice feeling at all, but its more of a PITA than anything! I can't take a bite out of food, I've got to cut everything into small pieces so I don't knock out the broken piece that my gum is holding in(my right tooth or left on the screen). that and if I close my mouth all the way to bite down with my back teeth I'll knock that piece off too cause the piece is hanging at a backwards angle so my lower teeth hits it.
heres how it looks now til friday when they'll fix everything properly, gotta bring in a picture so they know how my teeth used to look. keeping my fingers crossed that I won't need any root canals cause both nerves were hanging out for a few hours, they said its a 50/50 chance. other than that I think my lip is getting infected, seems like 90% of the time I get a cut out fishing it gets infected. ![]() goofy lookin temporary cap huh? its pretty much the whole tooth, theres like a 10th of an inch of tooth left along the top, the 1 thats still broken has a little more left, in the front anyways, the back goes up into the gum but good news is they can put a crown on it and I don't need a fake tooth implanted.
__________________
-Dusty '96 z28 built T56, AI 226/234, crane gold's 1.6I/1.5E, cc918's, CC 'R' lifters, CM PR's, imp HG's, 30# SVO's, becool rad, ps mids, 2OTL borla w/ DMH plate & TD, u/d pullies, MSD 6AL & wires, TR55's, 160tstat, LT4 KM, madtuner, !AIR!, !EGR!, !CAT!, LS1 DS, poly mounts, powerslot/hawk HP+, hotchkis LCA's, centerforce df, pro5.0, !168.5#'s! LE2's waiting 2b installed |
|
#7
|
||||
|
||||
|
oh fuck that man. that sucks.
__________________
![]() 1986 Camaro Iroc z28 305 TPI 700R4 -hooker-edelbrock 1 5/8" shorty headers-1.6 roller rockers-52mm TB-3.23 10 bolt- ...191rwhp/280rwtq...14.97@90.5 2.04 60' 2005 GMC Sierra 2500 LLY Duramax -exhaust-gauges-leveled-wheels-tune-egr delete....339rwhp/637rwtq |
|
#8
|
||||
|
||||
|
yeah broken teeth suck. got 4 broken or chipped, and 3 cracked in my accident. but that's because my face bounced off the steering wheel (not a wrench)....
__________________
![]() 99' T/A A4 i got parts!!! Tuned by GOD @ Slowhawk Performance. 325rwhp 333rwtq "Fifty years from now, when you're looking back at your life, don't you want to be able to say you had the guts to get in the car?" Quote:
|
|
#9
|
|||
|
|||
|
If you can dodge a wrench, you can dodge a ball!!!
Guess we know the answer to that one. Hahaha Just messing with ya. That sucks. If it is one thing I hate is having dental work done. Makes me cringe. Good luck man.
__________________
2000 SS Th350, FTI 4200 stall , cam, full bolt-ons, 150 wetshot, Moser 9inch/locker/4.11s, Slowhawk tuned. 493rwhp 570rwtq. 10.97 @ 127.7 1.58 60' and M6 10.84 @ 126.3 1.55 60' Th350 SOLD BUT NOT FORGOTTEN New Toy - 06 Torrid Red Gto M6. 231/242 cam, Kooks, magnaflow, GForce, Monster stg2, lingenfelter cai, 411rwhp 385rwtq. 12.40@111 |
|
#10
|
||||
|
||||
|
^ahahah! yeah ditto on dental work, if a broken bone wouldn't side line me work wise I'd take some broken fingers or some thing over a trip to the dentists. drills are the worst with those vibrations and that smell ughh I should find one of those dentists that knock you out to do work lol
__________________
-Dusty '96 z28 built T56, AI 226/234, crane gold's 1.6I/1.5E, cc918's, CC 'R' lifters, CM PR's, imp HG's, 30# SVO's, becool rad, ps mids, 2OTL borla w/ DMH plate & TD, u/d pullies, MSD 6AL & wires, TR55's, 160tstat, LT4 KM, madtuner, !AIR!, !EGR!, !CAT!, LS1 DS, poly mounts, powerslot/hawk HP+, hotchkis LCA's, centerforce df, pro5.0, !168.5#'s! LE2's waiting 2b installed |
![]() |
|
|