|
#31
|
|||
|
|||
|
I think what snowing was saying - don't fight ect when people give suggestions or ideas.
The intake didn't make power for a reason. The car does not need injectors at 390rwhp. Abt is not a good ls head porter. More than likely this is why the car was limited on power before and why it didn't gain with the intake. So, if timing and fuel are on, it is what it is. Done |
|
#32
|
||||
|
||||
|
Quote:
__________________
1999 Camaro z28 (1 of 64) Mystic Teal Metallic, 6 speed, t-tops Livernois Stage 2 cam 595/595, 232/232, 114 lsa, ported 241 heads, Comp springs, moly pushrods, LS7 lifters, Clevite valves, SLP oil pump, LS6 timing chain, LS6 intake manifold, Pacesetter Longtube headers, custom SLP Loudmouth II true duals, CME, SLP intake 402 whp, 382 lb-ft torque
|
|
#33
|
||||
|
||||
|
I hear yah man. I know it was kinda critical but it just makes me feel like an ass when people respond like that because I count on a lot of people's info on here.
|
|
#34
|
||||
|
||||
|
Quote:
Btw the injectors were at 100% duty cycle
__________________
1999 Camaro z28 (1 of 64) Mystic Teal Metallic, 6 speed, t-tops Livernois Stage 2 cam 595/595, 232/232, 114 lsa, ported 241 heads, Comp springs, moly pushrods, LS7 lifters, Clevite valves, SLP oil pump, LS6 timing chain, LS6 intake manifold, Pacesetter Longtube headers, custom SLP Loudmouth II true duals, CME, SLP intake 402 whp, 382 lb-ft torque
|
|
#35
|
||||
|
||||
|
Oright fair enough I'll apologize and retract my previous statements then. I understand.
|
|
#36
|
|||
|
|||
|
I think theres a reason the intake isn't making more power...maybe you should investigate it and question things that may affect it.....that is all
__________________
|
|
#37
|
|||
|
|||
|
The injector duty cycle is a calculation from the tuning perameters. Stock injectors can handle 440-450 rwhp on a dyno jet. I just did a car that made 435rwhp on stock injectors. So, in other words the 100 percent duty cycle is false.
New heads would be needed because they are probly already hogged out in the wrong areas. We see this alot with ported heads. I bet just switching to cheap tsp 5.3l 2.5 heads would put you past the 400 mark easilly. Now you just got what you got. I see no problem with it. |
|
#38
|
||||
|
||||
|
Yeah i guess youre right. The heads must not be able to flow well enough. Id go with 5.3s but dont wanna bump up compression because i eventually wanna boost it. We have a bone stock besides rear mount turbo and injectors trans am pushing 450 rwhp with stock manifolds, intake, even EGR at SMG lol
__________________
1999 Camaro z28 (1 of 64) Mystic Teal Metallic, 6 speed, t-tops Livernois Stage 2 cam 595/595, 232/232, 114 lsa, ported 241 heads, Comp springs, moly pushrods, LS7 lifters, Clevite valves, SLP oil pump, LS6 timing chain, LS6 intake manifold, Pacesetter Longtube headers, custom SLP Loudmouth II true duals, CME, SLP intake 402 whp, 382 lb-ft torque
|
|
#39
|
||||
|
||||
|
same problem i had. shit ton of mods and Crap ported heads. Ported doesnt always mean better. and i bet the better intake has stalled the air in the intake port. causing more problems then helping. i Still would stop by Dons. have him go over everything.
If i was going to Doctor A. and kept having the same issues and not getting the results i wanted id go see Doctor B. Just for a second opinion at Least!
__________________
![]() 1998 Firebird:buncha parts thats used to make it go fast..... not so much anymore. ![]() BAAAAAA!!!!!! |
|
#40
|
||||
|
||||
|
Quote:
|
![]() |
|
|